RUS FARP installation procedure

1. if you already have a templates.lua in C:\Users\*USERNAME**\Saved Games\DCS\MissionEditor, make a backup and replace it with the downloaded templates.lua. 

2. place the FARP anywhere in the mission editor.

3. in the templete menu, place "FARP templete Structures position markers" around the FARP. Drag unit#1 of the group to move the entire group so that it overlaps the center of the FARP marker.

4. place the following Structures at the location of unit#6-#14 of the group placed in step 3 and align the angles of each structure.

Group name : FARP templete Structures position marker

	unit #1/FARP center marker
	#2-5/ corner of FARP
	#6/FARP command Post/0deg
	#7/FARP Tent/0deg
	#8/FARP Ammo Storage/0deg
	#9/FARP Fuel Depot/0deg
	#10/FARP Tent/0deg
	#11/FARP Tent/270deg
	#12/FARP Tent/270deg
	#13/FARP Tent/270deg
	#14/FARP Tent/270deg
	#15/H1 position
	#16/H2 position
	#17/H3 position
	#18/H4 position
	
5. groups #15-#18 indicate the ground start position for the helicopter. Once the helicopter is in place, delete the template group. If necessary, leave only #2-#5 or replace them with appropriate units.

6. in the templete menu, place "FARP templete Ground Units" around the FARP. Drag unit#1 of the group so that unit#17 overlaps the center of the FARP mark, move the entire group, and delete #17.

Group name : FARP templete Ground Units

	unit #1/Truck Ural-375 Mobile C2/273deg
	#2/LUV UAZ-469 Jeep/8deg
	#3/Truck KAMAZ 43101/351deg
	#4/Refueler ATMZ-5/301deg
	#5/Truck Ural-375/351deg
	#6/LUV UAZ-469 Jeep/351deg
	#7/GPU APA-80 on ZIL-131/017deg
	#8/Refueler ATZ-10/351deg
	#9/GPU APA-80 on ZIL-131/063deg
	#10/MLRS BM-21 Grad 122mm/005deg
	#11/MLRS BM-21 Grad 122mm/005deg
	#12/Truck Ural-375/005deg
	#13/LUV UAZ-469 Jeep/272deg
	#14/MBT T-55/270deg
	#15/MBT T-55/270deg
	#16/MBT T-55/270deg
	#17/FARP center marker

7. when changing the orientation of the FARP, change the installation angle of the templetes to match the angle of the installed FARP. The angle of each Structures to be replaced refers to each unit in the template group.

8. If you already have your own template, open the template.lua with a text editor and add it. Or, set up a group of templates in the mission, save it, and later revert to the original templates.lua and add it to the templates yourself.

------------------------

RUS FARP設置手順

1. C:\Users\**USERNAME**\Saved Games\DCS\MissionEditorにtempletes.luaが既にあるならバックアップを取って、ダウンロードしたtempletes.luaに置き換える。
2. ミッションエディタで任意の場所にFARPを設置。
3. templeteメニューで、周囲にFARP templete Structures position markerを設置する。グループのunit#1をドラッグしてFARPマークの中心に重なるように、グループ全体を移動させる。
4. 3で設置したグループのunit#6-#14の場所に、以下のStructuresを設置して、角度を合わせる。

Group name : FARP templete Structures position marker

	unit #1/FARP center marker
	#2-5/ corner of FARP
	#6/FARP command Post/0deg
	#7/FARP Tent/0deg
	#8/FARP Ammo Storage/0deg
	#9/FARP Fuel Depot/0deg
	#10/FARP Tent/0deg
	#11/FARP Tent/270deg
	#12/FARP Tent/270deg
	#13/FARP Tent/270deg
	#14/FARP Tent/270deg
	#15/H1 position
	#16/H2 position
	#17/H3 position
	#18/H4 position

5. グループの#15-#18はヘリコプターのグラウンドスタートポジションを示す。ヘリコプターを設置したら、テンプレートのグループを削除する。必要に応じて#2-#5だけを残すか、適当なユニットに置き換える。
6. templeteメニューで、周囲にFARP templete Ground Unitsを設置する。グループのunit#1をドラッグしてunit#17がFARPマークの中心に重なるように、グループ全体を移動させ、#17を削除する。

Group name : FARP templete Ground Units

	unit #1/Truck Ural-375 Mobile C2/273deg
	#2/LUV UAZ-469 Jeep/8deg
	#3/Truck KAMAZ 43101/351deg
	#4/Refueler ATMZ-5/301deg
	#5/Truck Ural-375/351deg
	#6/LUV UAZ-469 Jeep/351deg
	#7/GPU APA-80 on ZIL-131/017deg
	#8/Refueler ATZ-10/351deg
	#9/GPU APA-80 on ZIL-131/063deg
	#10/MLRS BM-21 Grad 122mm/005deg
	#11/MLRS BM-21 Grad 122mm/005deg
	#12/Truck Ural-375/005deg
	#13/LUV UAZ-469 Jeep/272deg
	#14/MBT T-55/270deg
	#15/MBT T-55/270deg
	#16/MBT T-55/270deg
	#17/FARP center marker

7. FARPの方位を変更する時は、設置したFARPの角度に合わせて、templetesの設置角度を変更する。置き換える各Structuresの角度は、テンプレートグループの各ユニットを参照する。

8．自作templeteが既にある場合は、templetes.luaをテキストエディタで開いて、追記する。或いは、ミッションにテンプレートのグループを設置して保存し、後で、templetes.luaを元に戻して、テンプレートに自分で登録する。